Check if your energy meter isn't working properly
This advice applies to Wales. See advice for See advice for England, See advice for Northern Ireland, See advice for Scotland
Meter faults are rare. If your bill is higher than expected, it’s usually caused by something else. You should check if there is another reason your bill is higher than expected.
Your meter could be inaccurate or faulty if:
you're paying more than usual
you get a bill you weren’t expecting
your prepayment meter is showing an error message
Your supplier is responsible for making sure your meter works properly.
If you're renting and your landlord pays the energy bills, tell them you think the meter might not be working. They will be responsible for contacting the energy supplier and sorting out the issue.
If you have a prepayment meter
If the screen is blank or showing a message such as ‘error’, ‘call help’ or ‘battery’, there’s probably a fault with the meter. Tell your supplier straight away or you could be left with no energy.
If your electricity or gas has already stopped, your supplier has to send someone to repair or replace the meter. They have to arrive at your home within 3 hours - or within 4 hours on a weekend or bank holiday.
If your power supply is still working, your supplier still has to take appropriate action. This means they need to take steps to repair or replace your meter. For example, they might book an appointment for someone to repair or replace the meter. They have to take appropriate action within 3 hours - or 4 hours on a weekend or bank holiday.
The supplier doesn’t have to send someone out if they can fix the problem remotely - but they must do this within the same time.
If you need to top up your meter while you're waiting for your supplier, they should provide you with replacement tokens.
If your supplier doesn’t take appropriate action within the time they must pay you £30 compensation within 10 working days. If they don't pay you on time they have to pay an extra £30 for the delay.
If you have a credit meter
Carry out these checks to see if your meter is faulty:
switch off all the appliances in your home including any pilot lights
check if the numbers on the meter's display are still moving
If the meter stops, turn on 1 appliance at a time and check the meter. If the meter starts to move very quickly, the appliance could be faulty.
If the meter is still moving, it's probably faulty. If it's a gas meter, you might have a gas leak - report it immediately to the National Gas Emergency Service on 0800 111 999.
You should contact your supplier to investigate the problem with your meter. They can arrange for it to be tested. From the day you tell your supplier about the problem, they have 5 working days to do all of the following:
investigate the problem
take action to help them fix the problem
offer to confirm everything in writing, including what they’ve done to investigate the problem, what they’ll do to fix it and how long it will take
If your supplier doesn’t do all of these things within 5 working days they have to pay you £30 compensation. They must pay you this compensation within 10 working days. If they don't pay you on time they have to pay you an extra £30 for the delay.
Getting your meter tested by your supplier
Your supplier might first ask you to take daily meter readings over 7 days to check your usage. If this doesn’t prove anything, they might carry out further tests to check whether the meter is accurate. For example, they might install a second meter for a couple of weeks to compare the readings - this is sometimes called a ‘check meter’.
Take a reading before your meter is tested. Check how to read your gas or electricity meter.
You can take a photo of the meter reading - this can help to avoid any dispute if you get a bill.
Check if your supplier will charge you to test your meter
If the test shows your meter is working properly, your supplier might ask you to pay for the test - this could be around £200. Check with your supplier before arranging any tests.
If you’re not happy with the way your supplier investigates the meter the test, you can ask them to send for your meter to be checked by an independent examiner to do a meter accuracy test.
How electricity meters are tested
The examiner will test the meter at your home - a representative from your supplier will be there too. The examiner will check if it was installed correctly. Your supplier will then remove your meter and install a replacement. The examiner will take your meter away for further testing.
The test is free. However, if the test shows the meter is accurate, your supplier will charge you for removing the meter and installing a replacement. The cost will vary between suppliers but might be around £200.
Check what you can expect if you ask for an electricity meter test on GOV.UK.
How gas meters are tested
Your supplier will take your meter away to be tested by an independent examiner.
Take a reading before the meter is tested. Check how to read your gas meter.
You can take a photo of the meter reading and serial number - this can help to avoid any dispute if you get a bill. If you can’t find the serial number, ask your supplier what it is.
The test is free. However, if the test shows that the meter is accurate, your supplier will charge you for removing the meter and installing a replacement. The cost will vary between suppliers but might be around £200.
Check what you can expect if you ask for a gas meter test on GOV.UK.
Book an appointment with your supplier to test your meter
Your supplier should offer you an appointment as soon as they can. This depends on how urgent your appointment is and how busy they are.
Appointments are usually within normal working hours. Working hours usually means between 9am and 5pm. You usually have to choose a time slot between 2 and 4 hours.
If they offer an appointment that doesn't work for you, ask for a different date and time. Your supplier should say yes if they can.
Your supplier must pay you compensation if they:
miss the appointment
change the appointment without your agreement and with less than 1 working day’s notice
send someone without the right qualifications or tools to do the work
They’ll pay you £30 compensation within 10 working days. If they haven’t paid within 10 working days, they’ll pay you another £30.
After your meter is tested
The independent examiner will send you a certificate telling you if the meter is accurate or not.
If your meter is inaccurate
Your supplier should replace it. They should also refund you any money they owe you because of the inaccurate meter - for example, if you paid more than you should have on a bill.
You might be able to claim compensation too - ask your supplier.
If your meter is accurate
Your supplier might charge you for removing your meter and installing a replacement. The cost will vary between suppliers, but might be around £200.
If your supplier has gone bust
You should contact your new supplier to report any problems. You can get their contact details from their website.
It might take a while for your information to be moved from your old supplier to your new supplier. This means your new supplier might not be able to help with your problem straight away.
If you’re not happy
If you feel that your supplier has not followed the correct procedure, or you’re unhappy with the result, you should make a complaint to your supplier.
Further help
Contact the Citizens Advice consumer service if you need more help - a trained adviser can give you advice over the phone or online chat.
Help us improve our website
Take 3 minutes to tell us if you found what you needed on our website. Your feedback will help us give millions of people the information they need.